MOTindex

Common Isuzu D Max Utah Vision D C Td MOT failures

Based on 1,183 Isuzu D Max Utah Vision D C Td tests on record carrying an official DVSA defect code, so every category below is counted from real failures rather than estimated.

Full Isuzu D Max Utah Vision D C Td MOT data, pass rate and models →

Real DVSA defect codes

Every category comes from the official MOT Inspection Manual section code DVSA attaches to each defect, not guessed from keywords.

Choose a make or model

Filter the chart below to one make or one specific model, and it updates without leaving the page.

The whole national record

Built from DVSA's published MOT data for Great Britain, not only from vehicles looked up here.

See the breakdown for one make or model

Defaults to every make on record.

Where MOT tests find problems: Isuzu D Max Utah Vision D C Td

Axles, wheels, tyres and suspension 877 tests (74.1%)
Brakes 389 tests (32.9%)
Lamps, reflectors and electrical equipment 275 tests (23.2%)
Body, structure and attachments 147 tests (12.4%)
Visibility 73 tests (6.2%)
Nuisance (emissions and noise) 60 tests (5.1%)
Registration plates and vehicle identification 35 tests (3.0%)

A test can find problems in more than one category, so the figures above do not sum to 100%. Each percentage is the share of classifiable tests that found at least one defect in that category. Based on 1,183 classifiable tests for Isuzu D Max Utah Vision D C Td.

View the full Isuzu D Max Utah Vision D C Td page →

What Isuzu D Max Utah Vision D C Td failures look like

1,183 Isuzu D Max Utah Vision D C Td tests on record carry the manual reference DVSA attaches to each defect. The most frequent problems were with axles, wheels, tyres and suspension on 877 tests (74.1%), with brakes on 389 tests (32.9%) and with lamps, reflectors and electrical equipment on 275 tests (23.2%). A test can fail on more than one thing, and an MOT can be failed on one defect while another is only advised, so these counts do not add up to the number of tests.

Narrowed down from the categories to the individual defects themselves, three come up on more than one test:

  • Suspension arm pin or bush worn but not resulting in excessive movement

    MOT inspection manual reference 5.3.4, in axles, wheels, tyres and suspension

    Recorded on 255 of the 1,183 tests: 81 failures and 174 advisories or minors.

  • Wheel bearing has slight play

    MOT inspection manual reference 5.1.3, in axles, wheels, tyres and suspension

    Recorded on 231 of the 1,183 tests: 12 failures and 219 advisories or minors.

  • Tyre worn close to legal limit/worn on edge

    MOT inspection manual reference 5.2.3, in axles, wheels, tyres and suspension

    Recorded on 224 of the 1,183 tests: 36 failures and 188 advisories or minors.

Where there is enough data to compare: Isuzu D Max (270,895 tests), Isuzu Rodeo (70,178 tests), Isuzu Trooper (39,269 tests), Isuzu Tf (19,858 tests), every Isuzu model (505,763 tests).

Clauses are read from the manual reference at the end of every defect on the cached test records, and a defect shown here has to appear on at least two of them before it is named. The site-wide breakdown explains how that works and compares every make.